SWU – Switch unit

Block SymbolLicensing group: STANDARD

Function Description
The SWU block is used to select the appropriate signal which should be tracked by the inactive PIDU and MCU units in complex control structures. The input signal uc is copied to the output y when all the binary inputs OR1, …, OR4 are off, otherwise the output y takes over the uo input signal.

This block propagates the signal quality. More information can be found in the 1.4 section.

Input

uc	Signal valid for all ORi=0	Double (F64)
uo	Signal valid for any ORi=1	Double (F64)
OR1..OR4	Logical output of the block	Bool

Output

y	Analog output of the block	Double (F64)

[Previous] [Back to top] [Up] [Next]