SETPX – Block for remote parameter setting

Block SymbolLicensing group: STANDARD

Function Description
The SETPX block works on the same principle as the SETPB, SETPI, SETPR and SETPS blocks. However, unlike these blocks, it is universal and can set parameters of all types except array. The name of the remote parameter is entered in the sc parameter in the same way as with the other blocks. The value type is set by the type parameter, and the parameter setting mode is set by the SETF parameter. If the SETF parameter is set to on, the block sets the parameter value only when requested at the SET input. If the SETF parameter is set to off, the block sets the parameter value continuously.

This block propagates the signal quality. More information can be found in the 1.4 section.

Input

p	Desired parameter value	Any
SET	Input for initiating one-shot parameter write	Bool

Parameter

sc	String connection to the parameter	String
SETF	Set parameter only when forced to	Bool
	off .. Remote parameter is continuously updated on ... One-shot mode
type	Data type of item $⊙$ 8	Byte (U8)
	1 .... Bool 2 .... Byte (U8) 3 .... Short (I16) 4 .... Long (I32) 5 .... Word (U16) 6 .... DWord (U32) 7 .... Float (F32) 8 .... Double (F64) 9 .... Time 10 ... Large (I64) 11 ... Error 12 ... String 13 ... Reference

Output

y	Parameter value	Any
E	Error indicator	Bool
	off .. No error on ... An error occurred

[Previous] [Back to top] [Up] [Next]