POUT – Pulse output

Block SymbolLicensing group: STANDARD

Function Description
The POUT block shapes the input pulses U in such a way, that the output pulse Y has a duration of at least dtime seconds and the idle period between two successive output pulses is at least btime seconds. The input pulse occurring sooner than the period of btime seconds since the last falling edge of the output signal elapses has no effect on the output signal Y.

This block propagates the signal quality. More information can be found in the 1.4 section.

Input

U	Logical input of the block	Bool

Parameter

dtime	Minimum width of the output pulse [s] $⊙$ 1.0	Double (F64)
btime	Minimum delay between output pulses [s] $⊙$ 1.0	Double (F64)

Output

Y	Logical output of the block	Bool

[Previous] [Back to top] [Up] [Next]