[Previous] [Up] [Next]

MC_MoveLinearAbsolute – Linear move to position (absolute coordinates)

Block SymbolLicensing group: COORDINATED MOTION
Qt SVG Document Exported by REXYGEN Studio uAxesGroup Execute Position Velocity Acceleration Deceleration Jerk LimitMode CoordSystem BufferMode TransitionMode TransitionParameter Superimposed yAxesGroup Done CommandAborted Busy Active Error ErrorID MC_MoveLinearAbsolute

Function Description
The function block description is not yet available. Below you can find partial description of the inputs, outputs and parameters of the block. Complete documentation will be available in future revisions.

Inputs

uAxesGroup

Axes group reference

Reference

Execute

The block is activated on rising edge

Bool

Position

Array of coordinates (positions and orientations)

Reference

Velocity

Maximal allowed velocity [unit/s]

Double (F64)

Acceleration

Maximal allowed acceleration [unit/s2]

Double (F64)

Jerk

Maximal allowed jerk [unit/s3]

Double (F64)

CoordSystem

Reference to the coordinate system used

Long (I32)

1 ....

ACS

2 ....

MCS

3 ....

PCS

BufferMode

Buffering mode

Long (I32)

1 ....

Aborting

2 ....

Buffered

3 ....

Blending low

4 ....

Blending high

5 ....

Blending previous

6 ....

Blending next

TransitionMode

Transition mode in blending mode

Long (I32)

1 ....

TMNone

2 ....

TMStartVelocity

3 ....

TMConstantVelocity

4 ....

TMCornerDistance

5 ....

TMMaxCornerDeviation

11 ...

Smooth

TransitionParameter

Parametr for transition (depends on transition mode)

Double (F64)

Outputs

yAxesGroup

Axes group reference

Reference

Done

Algorithm finished

Bool

CommandAborted

Algorithm was aborted

Bool

Busy

Algorithm not finished yet

Bool

Active

The block is controlling the axis

Bool

Error

Error occurred

Bool

ErrorID

Result of the last operation

Error

i ....

REXYGEN general error

image/svg+xmlvelocity2 0.4 velocity1 0.4 transition_parameter2 1 transition_parameter1 1 transition_mode2 1 transition_mode1 1 reference_to_axesgroup [axes_group] position z2 1 position z1 1 position y2 0.8 position y1 1 position x2 1.2 position x1 1 orientation_of_effector2 −1.5 orientation_of_effector1 −1.5 execute2 [execute2] execute1 [execute1] coord_system2 2 coord_system1 2 buffer_mode2 1 buffer_mode1 1 acceleration2 1 acceleration1 1 RTOV2 uVecu1u2u3u4u5u6u7u8yVec RTOV1 uVecu1u2u3u4u5u6u7u8yVec MC_MoveLinearAbsolute −Function Block 2 uAxesGroupExecutePositionVelocityAccelerationJerkCoordSystemBufferModeTransitionModeTransitionParameteryAxesGroupDoneCommandAbortedBusyActiveErrorErrorID MC_MoveLinearAbsolute −Function Block 1 uAxesGroupExecutePositionVelocityAccelerationJerkCoordSystemBufferModeTransitionModeTransitionParameteryAxesGroupDoneCommandAbortedBusyActiveErrorErrorID

image/svg+xml

image/svg+xml1 1.5 2 2.5 3 3.5 4 0 0.5 1 bool Execute − MC_MoveLinearAbsolute −− Function Block 1 1 1.5 2 2.5 3 3.5 4 0 0.5 1 bool Active − MC_MoveLinearAbsolute −− Function Block 1 1 1.5 2 2.5 3 3.5 4 0 0.5 1 bool Done − MC_MoveLinearAbsolute −− Function Block 1 1 1.5 2 2.5 3 3.5 4 0 0.5 1 bool Execute − MC_MoveLinearAbsolute −− Function Block 2 1 1.5 2 2.5 3 3.5 4 0 0.5 1 bool Active − MC_MoveLinearAbsolute −− Function Block 2 1 1.5 2 2.5 3 3.5 4 0 0.5 1 bool Done − MC_MoveLinearAbsolute −− Function Block 2 1 1.5 2 2.5 3 3.5 4 −0.2 0 0.2 0.4 0.6 Velocity [rad/s] Velocity AxesGroup 1 1.5 2 2.5 3 3.5 4 0.8 1 1.2 commanded position x,yCas [s] Position [rad] Position AxesGroup x−axis y−axis

[Previous] [Back to top] [Up] [Next]

2024 © REX Controls s.r.o., www.rexygen.com